New Products

• Reduce RF application weight by 50%
• Lightweight & high quality
• Band Pass Filters, Diplexers, Power Combiners & Notch Filters

• < 50 ns switching speeds
• 2-18 GHz frequency range
• < 2.5 db Insertion Loss
• CW: 25 W Pulse: 50 W @ 50% Duty Cycle
• 26 mm x 50 mm x 10 mm package size

Lab grade interface passes data at up to 10 Gbps while providing a lowered reject band down to 200 MHz. Fully compatible with all USB speeds, formats and charging modes

CFM1-USB31-AB Single Channel Lab Grade Type A/B USB Gen 2 Filter

CFM1-USB31-C Single Channel Lab Grade Type-C 10Gbps USB 3.1 Gen 2 Filter

Electrical Specifications:

• Circuit Type: “C”
• Voltage range to 200VDC
• Capacitance values to 10,000pF

• Monitor the transmit or receive signals
• Compact size
• Rugged construction
• Switched amplification if needed
• Can receive hi-power input signals
• Optional frequency band selections
• Optional 2 channel to 10 channels
• High out of band rejection specifications
• High band to band isolation of 50dB minimum
• Low noise figure amplifiers
• 12-volt DC supply voltage required
• Power and control via 25 pin d-sub connector
• Wide operation temperature of -20 to +50° C
• Standard 50-ohm impedance
• RS-422 control

• Low Insertion Loss
• Fast Switching speeds
• Broadband from DC to 40Ghz
• Filter types
  • Microstrip, Stripline, Suspended Stripline, slabline
  • LC (discrete components)
  • Combline
  • Cavity
  • Interdigital
  • Tubular
  • Waveguide
  • Ceramic Resonator
  • Helical

Electrical Specifications:

• Passband: 22GHz – 24GHz
• Pass Band Ripple: ± 0.4 dB max
• Insertion Loss: 2.0 dB max

• Frequency Range 1-1.1 GHz
• Peak Power to 2.5KW
• Pulse Width 17 uS Maximum
• Switching speeds of 275 ns
• Switching rate to 2 KHz

• Frequency Range 1-1.1 GHz
• Peak Power to 5KW
• Average Power of 100 W
• Switching speeds of 200 ns
• Switching rate to 2 KHz